top of page

IRON FITTING IN FORT WORTH, TX

WATCH THIS VIDEO TO LEARN MORE ABOUT ARTISAN GOLF, LLC

★★★★★ 4.9 on Google.         3262 Chapel Creek Blvd, Fort Worth.         Right hand only

$300

FITTING SESSION COST

2-3 HRS

PER FITTING SESSION

FW TEXAS

FITTINGS DONE IN FORT WORTH

RH ONLY

ONLY AVAILABLE IN RIGHT HAND

CUSTOMER FEEDBACK

★★★★★

"It was not a fitting to get you to buy clubs. It was a fitting to ensure you play better golf for the goals you are trying to achieve. Best fitting I have had."

Justin M.

★★★★★

"Jay was great to work with. The entire focus was fitting to me rather than to the product."

Mark B.

★★★★★

"Jay measured my irons and identified a potential problem. It started to make sense when I was hitting the irons and the strike was instantly better."

Chris M.

mit-artisan-golf-3_edited.jpg

WHO IS FITTING YOU

JAY, THE IRON FITTING EXPERT!

Jay knows every major manufacturer inside and out, so the set you leave with is built around your swing, not whatever’s in a catalog. 

 

After seven years of fitting golfers, Jay understands that when your equipment fits your swing you play your best golf. Once he starts measuring a golfer’s current set, there are always issues.

​

 “Most golfers show up with clubs built for everyone but themselves. At Artisan, we fit and build a set specifically for how you play the game."

​

​

WHAT TO EXPECT

ALL IRON FITTINGS ARE DONE OUTDOORS.

Artisan has an interchangeable fitting system to test heads and shafts. 

  • Test Artisan's 3 iron models in 5, 7 and 9 irons 

  • 2 Degrees Up, Flat, and Standard

  • Shafts from True Temper, Nippon, KBS, Mitsubishi, UST.

IMG_8888_edited.jpg

YOU MIGHT BE ASKING

IS THIS IRON FITTING
FOR ME??

Yes! This iron fitting is especially for you if...

You do not know your distances for each club. Trackman 4 measures your real ball flight outdoors, off grass.

You do not know your true launch, spin or descent angle. You will see your own numbers, not a spec chart.

Your current set was fit to a chart, not your swing. Standard loft, lie and length are averages built for nobody in particular.

You have bought irons off a rack with no proof they'd make you better. You're ready for fewer mishits, not another set of shiny irons with good marketing.

You're ready for a set of irons manufactured and handcrafted to YOUR swing, and nobody else.

If you nodded or said “yes” to any of the above, then YES, this fitting is 100% for you.

It is not your swing. It is your set. What is missing is a better approach, one that measures your ball flight outdoors on real turf, then builds your set of irons around it.

WHAT TO EXPECT

HOW YOUR IRON FITTING WORKS!

1

MEASURE AND DOCUMENT YOUR CURRENT SET OF IRONS

Your fitter measures loft, lie, length, total weight and swing weight, which standardizes your set to Artisan standards. Then we go over any inconsistencies and concerns with your current clubs.

2

MOVE TO OUR PRIVATE OUTDOOR RANGE

You hit premium golf balls off grass while Trackman 4™ measures your ball flight. After a warm-up, we start a process to gather baseline data on your current irons.

3

YOUR FITTER SELECTS YOUR OPTIMAL COMBINATION

Using their expertise in ball flight, turf interaction and Trackman data, your fitter selects the right combination of head, shaft, loft, length and lie to optimize your ball flight.

4

HIT ALL 3 ARTISAN IRON MODELS AND A VARIETY OF SHAFTS

You hit our three iron head models (muscle-back, half-cavity and full-cavity) in the 5, 7 and 9 iron. Our interchangeable shaft system lets you test different weights, flexes and profiles, steel and graphite, from True Temper, Nippon, KBS, UST and more.

5

HIT THE SHOTS YOU ACTUALLY PLAY

Once your optimal combination of irons has been determined, you will hit shots that reflect real-world scenarios to further dial in your fitting.

6

FINALIZE YOUR IRON SET IN THE ARTISAN WORKSHOP

Custom ferrules, stamping and paint colors are selected to finish off your iron set.

7

THE COMPLETE ARTISAN FACILITY TOUR

Get a behind the scenes look at the Artisan Golf facility.

WHY ARTISAN GOLF?

WE ARE NOT LIKE THE OTHER CLUB FITTERS

THE OTHER FITTING

Hit into a net indoors, off artificial turf. That changes how the club hits the ground, so the ball flight you see is not what you get outside.

Trying prebuilt irons with a generic shaft, length, lie not specific to you.

Sell you standard-size clubs, like clothes off the rack, so you end up fit to an average golfer, not to your own body and swing.

May fit you into a single head design, so you never get to hit a muscle back, half cavity and full cavity side by side.

THE ARTISAN FITTING

Hit real shots outdoors on grass, with a ball-tracking radar (Trackman 4) measuring how far and how straight each one goes.

Swap club heads and shafts on the spot, in a fitting set built like the one we make for you.

Tailor each iron to your body and swing (how long it is and how it sits on the ground), with Jay Johnson, who does our iron fittings.

Choose from three iron shapes designed by Mike Taylor, one of our 2 founders, and assembled in Fort Worth.

PRICING

YOUR IRON FITTING, IN NUMBERS

$300

-

$150

=

$150

fitting fee total!

credit applied to Artisan irons, when you order!

Your fitting fee total IF you order Artisan irons.

AFTER YOUR FITTING

TIME TO BUILD YOUR 1 OF 1 CUSTOM IRONS!

1

You receive a tour-level build recommendation!

Your recommendation includes iron model, shaft, grip and club specs.

2

You fully customize your set of irons!

Ferrules, stamping and paint fill.

3

We build your irons to your exact specs!

We build a tour-level set of irons with your fitting and specs.

4

Your irons are delivered, reorder anytime! 

Pick up or have shipped. Ready to re-order your exact clubs anytime.

You'll receive $150 credit towards the purchase of your irons after the fitting. 

GOOD TO KNOW BEFORE YOU BOOK!

WHAT THE $300 COVERS

Your appointment, measurements of your current clubs, and 2 to 3 hours of testing heads, shafts and grips. We also coach ball position, grip, alignment and setup where it helps. You leave with your build recommendation. Clubs are ordered separately.

CLUBS YOU ALREADY OWN

Bring your entire set of golf clubs! The first part of Artisan's process is to measure and evaluate your current clubs. We have precise gauges that help us understand your clubs and how they've been training you.

YOUR FITTING CREDIT

$150 of your $300 comes back as credit toward your Artisan iron set. It is valid for one year from your fitting date.

RESCHEDULE A FITTING

Fittings can be rescheduled at no cost by emailing contact@artisangolftx.com, subject to availability.

HANDEDNESS

Artisan irons and fittings are only available in right-hand. This is to ensure we maintain a level of quality and cost involved with the products we build for customers.

GROUP FITTINGS

Want to treat your staff or take a group trip to visit us? Group fitting sessions or days can be scheduled by emailing contact@artisangolftx.com.

FITTING CANCELLATIONS 

If you need to cancel, the fitting fee minus a $30 cancellation fee is refunded to your original method of payment.

IF YOU DO NOT SHOW UP

Unless an Artisan team member contacts you to cancel, every booked appointment goes ahead. A $50 cancellation fee is charged to the card on file for a no-show.

FITTING LOCATION

3262 Chapel Creek Blvd, Fort Worth, TX 76116. Artisan is a private facility, so visits are by scheduled fitting only.

bottom of page